News
Category: Products, Company
Products, BECK Display, Displays, BECK Elektronik
DCMR-62 – Embedded DisplayPort TFT-Controller
BECK extends its portfolio of LC-Display-controllers with DCMR-62,
an eDP-Interface controller.
Due to higher data rates (up to 5.4 Gbit/s) and the combination of the usually separated interfaces for video- and backlight-signal transmission, it is possible to drive eDP-displays with a single cable. The standardized connector, which is used at compliant displays as well as on DCMR-62, helps users…
Passive Bauelemente, BECK Elektronik
25ppm, 0.1%, High Reliability – New High Precision Thick Film Chip Resistors from KOA
KOA’s new RS73-series are ESD transient tolerant high precision and high reliability resistors using thick film technology.
With a T.C.R. down to ±25ppm and a tolerance as low as ±0.1%, the new RS73-series from KOA is ideal for precision designs such as highaccuracy
sensing or voltage detection circuits in automotive, industrial and measuring applications, where ESD sensitivity is an issue.
The…
Products, BECK Display, Products, BECK Elektronik
15.6" FullHD TFT with On-Cell PCAP-Touch (AUO)
The G156HAB01.V0 is a new technology highlight of the leading Taiwanese display manufacturer AU Optronics Cooperation (AUO). The special feature of this product is the integration of the "projected capacitive touch panel" (PCAP) on the display cell below the polarizer – this new structure is called On-Cell Touch.
In contrast to the typical application of a PCAP touch, where the touch must be…
Passive Bauelemente, BECK Elektronik
Wide Terminal and Pulse Proof Chip Resistors for Automotive from KOA
KOA’s wide terminal resistors offer several advantages compared to standard footprints.
High reliability and enhanced terminal strength are essential in all power applications.
The 0612 chip size allows 4 × power rating compared to standard 1206 parts. This saves board space and is possible due to the improved heat dissipation via the solder joints.
The new WG73 series has approx. 20 times the…
Aktive Bauelemente, BECK Elektronik
Automotive Constant Current Regulated LED Driver from TSC
Low-Side Constant Current Regulator (CCR) for linear LED driving: TSCR420 & TSCR421
The AEC-Q100 qualified LED Driver regulates with a present 10mA nominal, that can be adjusted with an external resistor up to 300mA. It is designed for driving LEDs in strings and will reduce current at increasing temperatures to self-protect.
Operating as a series linear CCR for LED string current control, it…
Products, BECK Display, Displays, BECK Elektronik
Virtual Keys for PCAP Touch Panels
Combine touch control and buttons on one PCAP touch panel
PenMount Virtual Keys replace hardware keypads or buttons and can be assigned keyboard shortcuts and hotkeys.
When enabled with the advantages of PenMount PCAP controllers, the potential of PenMount Virtual Keys is limitless. Shortcuts for navigating frequently used options enhance the convenience of kiosks, POS, information,…
Passive Bauelemente, BECK Elektronik
High Voltage Thick Film Chip Resistor for Automotive Applications from KOA
KOA’s high voltage HV73-series has been expanded with the addition of the new HV73V-types for automotive applications.
- Increased power rating for HV73V2A (0805 = 0.25 W)
- Increased max. working voltage for HV73V2B (1206 = 800 V)
The special inner material makes the part suitable for high voltages with improved temperature cycling stability compared to standard resistors.
The higher critical…
BECK Elektronik, Displays
Wide range of EPD products and accessories
The wide range of sizes, starting from 1.1" up to the biggest one 42.0" e-paper displays, is available from stock or upon request.
Round form, flexible substrate, color versions are the variations, which are to find on our web page to meet all your expectations.
To facilitate your start into the e-paper technology we offer a range of driving kits to load your content to the display quickly.
You…
BECK Elektronik, Displays
Round Flexible e-Paper Display
Round LCDs, TFTs, OLEDs are successfully integrated in dozen of applications. The most popular applications are wearables, smart watches, smart buttons and labels.
Normally a continuous power supply is not used in such cases and the system operates by solar energy or battery as a power source. It means the design has to be low-power and effective. The e-paper displays are the best choice for such…
BECK Elektronik, Displays
Optical Bonding of E-Paper Displays
Modern technologies are streaming in our everyday life.
Displays are everywhere: outdoor signage, advertising in buses, info screens in the customer offices.
The application dictates its terms: which materials, housing and kind of assembly to use. The protection glasses, touch screens and UV-shields are coming on the stage. There are many possibilities how to bring the additional layers to the…